BL04B1 OUTLINE
問い合わせ番号
INS-0000000317
ABSTRACT
The BL04B1, “High Pressure and High Temperature” is a white X-ray beamline from a bending magnet. The use of high energy (20 - 150 keV) is suitable for energy-dispersive diffraction experiment using a solid state detector (SSD) and X-ray radiography experiment using a CCD camera. Moreover, the double silicon crystal monochromator can select the X-ray energy between 30 and 60 keV from synchrotron X-ray radiation through bending magnet, the 2D-XRD data is acquirable using large area CCD camera. This beamline is designed to conduct research on the structure and properties of materials in the Earth's interior under high-pressure and high-temperature conditions. High-pressure and high-temperature experiments are performed using two large-volume presses: SPEED-1500 and SPEED-Mk.II, both of which are installed in the tandem experimental stations (Experimental hutch 1, hutch 2) (Fig. 1). These large-volume presses are constructed by double-stage (Kawai-type) high-pressure vessels with two kinds of the anvils; the tungsten carbide (WC) and the sintered diamond (SD) (Fig. 2). The pressure can be reached up to 30 GPa with using WC anvil and over 30 GPa with using SD anvil, and its high pressure condition, and its high pressure and high temperature condition is corresponding to the upper or the lower mantle region in Earth's interior.
AREA OF RESEARCH
- In-situ X-ray measurements under high pressure and high temperature conditions using large-volume press and resistance heating
- Energy dispersive X-ray diffraction measurements (2θ = 3-16°/ 20-150 keV)
- Angle dispersive X-ray diffraction measurements (30-60 keV/ 2θ = <10°)
- X-ray absorption imaging
- Elastic velocity measurements under extreme conditions
KEYWORDS
- Scientific field
High-pressure, Geophysics. - Equipment
Large-volume press, Energy-dispersive X-ray diffraction, Angle-dispersive X-ray diffraction, X-ray radiography
SOURCE AND OPTICS
Fig. 1. Layout of BL04B1 beamline.
Fig. 2. The second stage anvils of the tungsten carbide (WC) and the sintered diamond (SD) cubes.
Fig. 3. Comparisons of the pressure generations using the WC and the SD anvils.
- X-rays at Sample
Energy range 20 ∼ 150 keV (white) Beam size 0.05 × 0.05 ∼ 10 × 10mm2 Beam divergence (V) < 0.05 mrad Beam divergence (H) < 0.5 mrad
EXPERIMENTAL STATIONS
PUBLICATION SEARCH
* Sorry, Some parts of results are displayed using Japanese characters.
CONTACT INFORMATION
Please note that each e-mail address is followed by "@spring8.or.jp."
Yuji HIGO
SPring-8 / JASRI
1-1-1 Kouto, Sayo-cho, Sayo-gun, Hyogo 679-5198
Phone : +81-(0)791-58-2750
Fax : +81-(0)791-58-0830
e-mail : higo
Noriyoshi TSUJINO
SPring-8 / JASRI
1-1-1 Kouto, Sayo-cho, Sayo-gun, Hyogo 679-5198
Phone : +81-(0)791-58-2750
Fax : +81-(0)791-58-0830
e-mail : noriyoshi.tsujino
Sho KAKIZAWA
SPring-8 / JASRI
1-1-1 Kouto, Sayo-cho, Sayo-gun, Hyogo 679-5198
Phone : +81-(0)791-58-2750
Fax : +81-(0)791-58-0830
e-mail : kakizawa